| All rights reserved. THE FINEST EDGE LLC. |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Anubis Black
$68.00
Allen Elishewitz is an acclaimed young Canyon Lake, Texas, knifemaker
who offers a surprising range of custom knives, many with Egyptian-
themed names. We asked Allen to design a production version of his
Anubis (the jackal-headed god of the underworld, according to ancient
Egyptian mythology). Our new CRKT Anubis™ shows its lineage as an
Elishewitz shape, with the benefits of advanced production technology.
Blade length: 3 1/2"
Open length: 8 1/8"
Steel: AUS 8 Stainless
Handle: Injection-molded Zytel scales
$68.00
Allen Elishewitz is an acclaimed young Canyon Lake, Texas, knifemaker
who offers a surprising range of custom knives, many with Egyptian-
themed names. We asked Allen to design a production version of his
Anubis (the jackal-headed god of the underworld, according to ancient
Egyptian mythology). Our new CRKT Anubis™ shows its lineage as an
Elishewitz shape, with the benefits of advanced production technology.
Blade length: 3 1/2"
Open length: 8 1/8"
Steel: AUS 8 Stainless
Handle: Injection-molded Zytel scales
Anubis
$55.00
Allen Elishewitz is an acclaimed young Canyon Lake, Texas, knifemaker
who offers a surprising range of custom knives, many with Egyptian-
themed names. We asked Allen to design a production version of his
Anubis (the jackal-headed god of the underworld, according to ancient
Egyptian mythology). Our new CRKT Anubis™ shows its lineage as an
Elishewitz shape, with the benefits of advanced production technology.
Blade length: 3 1/2"
Open length: 8 1/8"
Steel: AUS 8 Stainless
Handle: Injection-molded Zytel scales
$55.00
Allen Elishewitz is an acclaimed young Canyon Lake, Texas, knifemaker
who offers a surprising range of custom knives, many with Egyptian-
themed names. We asked Allen to design a production version of his
Anubis (the jackal-headed god of the underworld, according to ancient
Egyptian mythology). Our new CRKT Anubis™ shows its lineage as an
Elishewitz shape, with the benefits of advanced production technology.
Blade length: 3 1/2"
Open length: 8 1/8"
Steel: AUS 8 Stainless
Handle: Injection-molded Zytel scales
Bear Claw
$31.00
Russ Kommer is a bright young custom knifemaker who was based in
Anchorage, Alaska, for many years. Conditions there are rugged, either
from the climate or the work folks are doing. He thought a knife that was
easy to grip and hard to lose would be a big hit, and since he made the
first Bear Claw™, he hasn’t been able to meet the demand. His original
concept was a self-defense knife for women that would be lightweight,
easy to access and control. But it seems that every parachutist, bush pilot
and commercial fisherman who sees one, wants one.
Blade length: 2 3/8"
Overall length: 5 3/4"
Steel: AUS4 Stainless
Handle: Zytel
Sheath included
$31.00
Russ Kommer is a bright young custom knifemaker who was based in
Anchorage, Alaska, for many years. Conditions there are rugged, either
from the climate or the work folks are doing. He thought a knife that was
easy to grip and hard to lose would be a big hit, and since he made the
first Bear Claw™, he hasn’t been able to meet the demand. His original
concept was a self-defense knife for women that would be lightweight,
easy to access and control. But it seems that every parachutist, bush pilot
and commercial fisherman who sees one, wants one.
Blade length: 2 3/8"
Overall length: 5 3/4"
Steel: AUS4 Stainless
Handle: Zytel
Sheath included
Bez Tine Skinner
$65.00
His Bez Tine™ Skinner is a classic fixed-blade skinner, with a blade of
1.4116 high-carbon stainless steel. The blade receives a high hollow grind
for top skinning performance, and then is mirror polished for maximum
corrosion resistance. At the handle, the full-tang blade is mated to a
stainless steel bolster and walnut scales, held with stainless steel pins and
meticulously hand-contoured. The handle features four deep finger choils
for grip under the slipperiest conditions. A thick custom leather sheath is
included.
Blade length: 3 1/4"
Overall length: 7 3/8"
Steel: 1.4116 Stainless
Handle: Wood scales
Sheath included
$65.00
His Bez Tine™ Skinner is a classic fixed-blade skinner, with a blade of
1.4116 high-carbon stainless steel. The blade receives a high hollow grind
for top skinning performance, and then is mirror polished for maximum
corrosion resistance. At the handle, the full-tang blade is mated to a
stainless steel bolster and walnut scales, held with stainless steel pins and
meticulously hand-contoured. The handle features four deep finger choils
for grip under the slipperiest conditions. A thick custom leather sheath is
included.
Blade length: 3 1/4"
Overall length: 7 3/8"
Steel: 1.4116 Stainless
Handle: Wood scales
Sheath included
Carson M16 Tanto
$40.00
When we considered offering Kit Carson’s very popular aluminum M16®
InterFrame construction. Instead of aluminum handles, we use tough,
textured Zytel® scales over a 420J2 stainless steel liner InterFrame. We
overbuild it for rigidity, using solid Zytel back spacers. And we assemble
the handle with superior offset Torx® fasteners. The handle is slightly
heftier and wider than our aluminum build M16, but it is exceptionally
rigid. To some of us, it actually fills the hand better.
Blade length: 3"
Open length: 7 3/8"
Steel: AUS 4 Stainless
Handle: Textured Zytel
$40.00
When we considered offering Kit Carson’s very popular aluminum M16®
InterFrame construction. Instead of aluminum handles, we use tough,
textured Zytel® scales over a 420J2 stainless steel liner InterFrame. We
overbuild it for rigidity, using solid Zytel back spacers. And we assemble
the handle with superior offset Torx® fasteners. The handle is slightly
heftier and wider than our aluminum build M16, but it is exceptionally
rigid. To some of us, it actually fills the hand better.
Blade length: 3"
Open length: 7 3/8"
Steel: AUS 4 Stainless
Handle: Textured Zytel
Carson M16 Spear Point
$40.00
When we considered offering Kit Carson’s very popular aluminum M16®
design in a more affordable build, we turned to our very successful
InterFrame construction. Instead of aluminum handles, we use tough,
textured Zytel® scales over a 420J2 stainless steel liner InterFrame. We
overbuild it for rigidity, using solid Zytel back spacers. And we assemble
the handle with superior offset Torx® fasteners. The handle is slightly
heftier and wider than our aluminum build M16, but it is exceptionally
rigid. To some of us, it actually fills the hand better.
Blade length: 3 1/2"
Open length: 8 1/4"
Steel: AUS 4 Stainless
Handle: Textured Zytel
$40.00
When we considered offering Kit Carson’s very popular aluminum M16®
design in a more affordable build, we turned to our very successful
InterFrame construction. Instead of aluminum handles, we use tough,
textured Zytel® scales over a 420J2 stainless steel liner InterFrame. We
overbuild it for rigidity, using solid Zytel back spacers. And we assemble
the handle with superior offset Torx® fasteners. The handle is slightly
heftier and wider than our aluminum build M16, but it is exceptionally
rigid. To some of us, it actually fills the hand better.
Blade length: 3 1/2"
Open length: 8 1/4"
Steel: AUS 4 Stainless
Handle: Textured Zytel
Cascade Lockback
$28.00
Jim Hammond’s Cruiser series of customs seemed like an ideal starting
point in our development of a high-quality affordable lockback work
folder. As the first custom knifemaker and Knifemakers’ Guild member to
work with CRKT, he understood the translation necessary to arrive at our
production Cascade Lockback. The blade is a Hammond modified clip point
shape, hollow ground from 420J2 stainless steel with a bead-blast finish,
and available with a Combination Razor-Sharp and Triple-Point™ Serrated
edge. For maximum comfort, we used our Twin-Fused™ handle technology
using a rigid, injection-molded high-impact polycarbonate frame with a
soft, comfortable diamond-patterned injection-molded Kraton® grip for a
firm, safe hold. This build, combined with the rounded handle cross
section, deep finger choil with guard, pronounced butt pommel and blade
thumb ramp with friction grooves, results in one of the most secure and
comfortable grips in any folder, at any price.
Blade length: 3 3/8"
Open length: 8 1/2"
Steel: 420J2 Stainless
Handle: Black injection-molded Kraton®
$28.00
Jim Hammond’s Cruiser series of customs seemed like an ideal starting
point in our development of a high-quality affordable lockback work
folder. As the first custom knifemaker and Knifemakers’ Guild member to
work with CRKT, he understood the translation necessary to arrive at our
production Cascade Lockback. The blade is a Hammond modified clip point
shape, hollow ground from 420J2 stainless steel with a bead-blast finish,
and available with a Combination Razor-Sharp and Triple-Point™ Serrated
edge. For maximum comfort, we used our Twin-Fused™ handle technology
using a rigid, injection-molded high-impact polycarbonate frame with a
soft, comfortable diamond-patterned injection-molded Kraton® grip for a
firm, safe hold. This build, combined with the rounded handle cross
section, deep finger choil with guard, pronounced butt pommel and blade
thumb ramp with friction grooves, results in one of the most secure and
comfortable grips in any folder, at any price.
Blade length: 3 3/8"
Open length: 8 1/2"
Steel: 420J2 Stainless
Handle: Black injection-molded Kraton®
Dogfish Neck Knife
$20.00
Tom Krein is a young custom knifemaker who has created quite a stir with
his Mid Tech Dogfish neck knife. It seemed like the perfect affordable
CRKT production knife, so here it is. Tom has a great sense of style, so
unlike many skeletonized flat blades, the Dogfish™ is graceful, gives a
secure grip, and also has that dogfish face at the pommel which turns out
to be—a lanyard hole and bottle opener! It has a secure finger choil and
friction grooves at the thumb spine and near the butt.
Blade length: 2 1/4"
Overall length: 5 1/4"
Steel: 3Cr13 stainless
One piece construction
Neck sheath included
$20.00
Tom Krein is a young custom knifemaker who has created quite a stir with
his Mid Tech Dogfish neck knife. It seemed like the perfect affordable
CRKT production knife, so here it is. Tom has a great sense of style, so
unlike many skeletonized flat blades, the Dogfish™ is graceful, gives a
secure grip, and also has that dogfish face at the pommel which turns out
to be—a lanyard hole and bottle opener! It has a secure finger choil and
friction grooves at the thumb spine and near the butt.
Blade length: 2 1/4"
Overall length: 5 1/4"
Steel: 3Cr13 stainless
One piece construction
Neck sheath included
Drifter G-10
$20.00
The Drifter G10 is a locking liner folder with black G10 scales and a premum
8Cr14MoV stainless steel 2.875” drop point blade in a gray titanium nitride
finish. It features an InterFrame build with stainless steel liners and a black
stainless steel clip. 6460K: G10 InterFrame Build, Combined Razor-Sharp &
Blade: Drop Point
Lock: Frame Lock
Origin: China
Blade Length: 2-7/8"
Closed Length: 3-5/8"
Weight 2.4 oz.
Handle G10
Blade Steel: 8Cr14MoV
Rockwel: 58-59 Rc.
$20.00
The Drifter G10 is a locking liner folder with black G10 scales and a premum
8Cr14MoV stainless steel 2.875” drop point blade in a gray titanium nitride
finish. It features an InterFrame build with stainless steel liners and a black
stainless steel clip. 6460K: G10 InterFrame Build, Combined Razor-Sharp &
Blade: Drop Point
Lock: Frame Lock
Origin: China
Blade Length: 2-7/8"
Closed Length: 3-5/8"
Weight 2.4 oz.
Handle G10
Blade Steel: 8Cr14MoV
Rockwel: 58-59 Rc.
Edgie 2 Self Sharpening Knife
$29.00
This year, Steve Jernigan came up with a dual-edged Edgie lockback with a
3.25” blade. The “American Eagle Wharncliffe” blade grind tapers at the tip
for better penetration and much easier cutting of thick materials such as
corrugated cardboard. Again, the frame is superstrong thanks to our
stainless steel InterFrame build with Zytel scales. A textured surface and
soft grooved TPR insert give excellent grip under all conditions. Blue or
yellow insert models are available. The long blade slot allows easy one-
hand opening. The lockback release is at the butt for exceptional lockup
safety. That’s the Edgie story. It’s not too glamorous, just a tale of
affordable and tough little work knives designed to take a lot of use and
stay sharp.
Blade length: 3.25" Microserrated Cutting Edge, Blue Scale Insert
Open length: 7.50"
Closed: Handle length: 5.30”
Steel: 5Cr15Mov, 55-57 HRC
$29.00
This year, Steve Jernigan came up with a dual-edged Edgie lockback with a
3.25” blade. The “American Eagle Wharncliffe” blade grind tapers at the tip
for better penetration and much easier cutting of thick materials such as
corrugated cardboard. Again, the frame is superstrong thanks to our
stainless steel InterFrame build with Zytel scales. A textured surface and
soft grooved TPR insert give excellent grip under all conditions. Blue or
yellow insert models are available. The long blade slot allows easy one-
hand opening. The lockback release is at the butt for exceptional lockup
safety. That’s the Edgie story. It’s not too glamorous, just a tale of
affordable and tough little work knives designed to take a lot of use and
stay sharp.
Blade length: 3.25" Microserrated Cutting Edge, Blue Scale Insert
Open length: 7.50"
Closed: Handle length: 5.30”
Steel: 5Cr15Mov, 55-57 HRC
Elishewitz Horus Combo Edge
$50.00
Horus is familiar to Egyptologists as the hawk-headed god, lord of the sky.
As Canyon Lake, Texas knifemaker Allen Elishewitz developed this new
design, similar in many ways to his larger custom Creedmore, we saw an
aggressive hawk-like character in its crisp edges, facets and choils, hence
the Horus™ name. It reminds us of an F-117 stealth fighter, too. This is
much more than an Elishewitz design statement, even though it is a piece
that grabs your attention immediately. It’s a very functional every day carry
with the patented features that have made CRKT folders so popular,
including OutBurst™ assisted opening(1) and the LAWKS® safety(2). The
Horus frame features an unusual choiled pistol-grip curve. The stainless
steel InterFrame build has one locking liner and sculpted black textured
Zytel® scales. The wild honey gold variegated inlays are the latest CPL
composite, like that used in modern bowling balls. Injection molding makes
each one unique. The blade is AUS 8 premium stainless steel in a bead-blast
finish. We call it an “Elishewitz stealth grind” because it is composed almost
entirely of flat angular facets. The result is a very strong blade with a strong
central spine which extends very near to the tip. It is available in both Razor-
Sharp and Combined Razor-Sharp and Triple-Point™ Serrated edge models.
Of course, this design demands our patented OutBurst™ assisted opening
mechanism, which instantly springs the blade fully open after you have
opened the blade approximately 30 degrees. The OutBurst mechanism can
be removed to allow fast, conventional one-hand opening using the custom
Elishewitz ramped thumb stud, depending on your preference or local
ordinances. In addition, our patented LAWKS® safety effectively converts
your folder into a virtual fixed blade when actuated. Just slide the lever
forward to lock, and slide it back to enable easy one-hand closing.
$50.00
Horus is familiar to Egyptologists as the hawk-headed god, lord of the sky.
As Canyon Lake, Texas knifemaker Allen Elishewitz developed this new
design, similar in many ways to his larger custom Creedmore, we saw an
aggressive hawk-like character in its crisp edges, facets and choils, hence
the Horus™ name. It reminds us of an F-117 stealth fighter, too. This is
much more than an Elishewitz design statement, even though it is a piece
that grabs your attention immediately. It’s a very functional every day carry
with the patented features that have made CRKT folders so popular,
including OutBurst™ assisted opening(1) and the LAWKS® safety(2). The
Horus frame features an unusual choiled pistol-grip curve. The stainless
steel InterFrame build has one locking liner and sculpted black textured
Zytel® scales. The wild honey gold variegated inlays are the latest CPL
composite, like that used in modern bowling balls. Injection molding makes
each one unique. The blade is AUS 8 premium stainless steel in a bead-blast
finish. We call it an “Elishewitz stealth grind” because it is composed almost
entirely of flat angular facets. The result is a very strong blade with a strong
central spine which extends very near to the tip. It is available in both Razor-
Sharp and Combined Razor-Sharp and Triple-Point™ Serrated edge models.
Of course, this design demands our patented OutBurst™ assisted opening
mechanism, which instantly springs the blade fully open after you have
opened the blade approximately 30 degrees. The OutBurst mechanism can
be removed to allow fast, conventional one-hand opening using the custom
Elishewitz ramped thumb stud, depending on your preference or local
ordinances. In addition, our patented LAWKS® safety effectively converts
your folder into a virtual fixed blade when actuated. Just slide the lever
forward to lock, and slide it back to enable easy one-hand closing.
Elishewitz Scarab
$50.00
The Scarab has a 3.25” blade and is 4.25” long when folded, dimensions that
knife users tell us are “just about right” for a personal carry. Weighing 4.9
ounces, it also has just the right heft. The Scarab frame uses a stainless steel
InterFrame build with one locking liner. Black textured Zytel® scales are
inlaid with the latest tough and hard CPL composite, like that used in modern
bowling balls, featuring blue/gray swirls. Each inlay has a unique pattern.
call it an Elishewitz drop/spear point, swedged and recurved. The blade is
AUS 8 premium stainless steel in a bead-blast finish. Both Razor-Sharp and
Combined Razor-Sharp and Triple-Point™ Serrated edge grinds are available.
The Scarab has a 3.25” blade and is 4.25” long when folded, dimensions that
mechanism, which instantly springs the blade fully open after you have
opened the blade approximately 30 degrees. If desired, the OutBurst
mechanism can be removed to allow fast, conventional one-hand opening
using the custom Elishewitz ramped thumb stud. The Scarab’s patented
LAWKS® safety effectively converts your folder into a virtual fixed blade
LAWKS® safety effectively converts your folder into a virtual fixed blade
when actuated. Just slide the lever forward to lock, and slide it back to
enable easy one-hand closing. As a bonus, you get a gold Elishewitz logo on
the blade and a custom removable stainless steel pocket/gear clip.
$50.00
The Scarab has a 3.25” blade and is 4.25” long when folded, dimensions that
knife users tell us are “just about right” for a personal carry. Weighing 4.9
ounces, it also has just the right heft. The Scarab frame uses a stainless steel
InterFrame build with one locking liner. Black textured Zytel® scales are
inlaid with the latest tough and hard CPL composite, like that used in modern
bowling balls, featuring blue/gray swirls. Each inlay has a unique pattern.
call it an Elishewitz drop/spear point, swedged and recurved. The blade is
AUS 8 premium stainless steel in a bead-blast finish. Both Razor-Sharp and
Combined Razor-Sharp and Triple-Point™ Serrated edge grinds are available.
The Scarab has a 3.25” blade and is 4.25” long when folded, dimensions that
mechanism, which instantly springs the blade fully open after you have
opened the blade approximately 30 degrees. If desired, the OutBurst
mechanism can be removed to allow fast, conventional one-hand opening
using the custom Elishewitz ramped thumb stud. The Scarab’s patented
LAWKS® safety effectively converts your folder into a virtual fixed blade
LAWKS® safety effectively converts your folder into a virtual fixed blade
when actuated. Just slide the lever forward to lock, and slide it back to
enable easy one-hand closing. As a bonus, you get a gold Elishewitz logo on
the blade and a custom removable stainless steel pocket/gear clip.
Fulcrum Flame
$58.00
Charles Kain’s cool patented* opening action, but he was even more excited
is the co-designer of many of our stunning I.D. Works™ tools, and has a
flair for the unusual. So he sent us drawings for the Fulcrum™ Flame, and
now it’s a CRKT production knife. The knife design is a study in curves, with
nary a straight line to be found. The 2.75” AUS 8 premium stainless steel
blade is a drop point, swedged and recurved with a high hollow grind. Tom
came up with a curvilinear CRKT logo that is laser cut into the blade.
Structurally, the Flame uses our high-carbon stainless steel InterFrame build
with a steel pivot at the back spacer. Scales are 6061 T6 aluminum, black
anodized, with radiating circular engraving and a flame relief on the front
scale. The handle shape is designed to fit the hand with an extremely deep
finger choil resulting in a wasp-waist, then swelling into a comfortable
When Tom Stokes saw our Kommer Fulcrum™, he was excited about curved
butt. If your friends aren’t impressed by the Flame’s flowing design, they
will be when they see the crisp click-click instant opening. To open the
Flame, simply press the left side of the frame down with your thumb. The
blade swings out to the 90-degree position. Click! Then pull the left side of
When Tom Stokes saw our Kommer Fulcrum™, he was excited about the
frame back, gripping with your index finger at the choil, and the blade
continues to rotate open and lock in the open position. Click! After a few
openings, you can do it naturally in one continuous, fluid action, or
“fulcrumation.” To close the Flame, simply release the stainless steel locking
liner. One-hand closing is also fast and easy. Model 7406 has a bright satin
finished blade, liners, and removable stainless steel pocket/gear clip. The
black-out model 7406K has a non-reflective black titanium nitride blade
finish for maximum corrosion resistance. Liners and stainless steel clip
receive a spectral titanium nitride finish which shows through a relief in the
left scale. At CRKT, we’ve produced many eye-popping designs over the
years, but the Flame is certainly the most sensuous of the lot.
7406K: Razor-Sharp Cutting Edge, Black Blade, Spectral Titanium Nitride
Liners
Length: 2.75” (70 mm)
Thickness: 0.12” (2.9 mm)
Steel: AUS 8, 58-59 HRC
Closed Handle length: 4.25” (108 mm)
Open Overall length: 7.0” (178 mm)
Weight: 4.4 oz. (125 g)
$58.00
Charles Kain’s cool patented* opening action, but he was even more excited
is the co-designer of many of our stunning I.D. Works™ tools, and has a
flair for the unusual. So he sent us drawings for the Fulcrum™ Flame, and
now it’s a CRKT production knife. The knife design is a study in curves, with
nary a straight line to be found. The 2.75” AUS 8 premium stainless steel
blade is a drop point, swedged and recurved with a high hollow grind. Tom
came up with a curvilinear CRKT logo that is laser cut into the blade.
Structurally, the Flame uses our high-carbon stainless steel InterFrame build
with a steel pivot at the back spacer. Scales are 6061 T6 aluminum, black
anodized, with radiating circular engraving and a flame relief on the front
scale. The handle shape is designed to fit the hand with an extremely deep
finger choil resulting in a wasp-waist, then swelling into a comfortable
When Tom Stokes saw our Kommer Fulcrum™, he was excited about curved
butt. If your friends aren’t impressed by the Flame’s flowing design, they
will be when they see the crisp click-click instant opening. To open the
Flame, simply press the left side of the frame down with your thumb. The
blade swings out to the 90-degree position. Click! Then pull the left side of
When Tom Stokes saw our Kommer Fulcrum™, he was excited about the
frame back, gripping with your index finger at the choil, and the blade
continues to rotate open and lock in the open position. Click! After a few
openings, you can do it naturally in one continuous, fluid action, or
“fulcrumation.” To close the Flame, simply release the stainless steel locking
liner. One-hand closing is also fast and easy. Model 7406 has a bright satin
finished blade, liners, and removable stainless steel pocket/gear clip. The
black-out model 7406K has a non-reflective black titanium nitride blade
finish for maximum corrosion resistance. Liners and stainless steel clip
receive a spectral titanium nitride finish which shows through a relief in the
left scale. At CRKT, we’ve produced many eye-popping designs over the
years, but the Flame is certainly the most sensuous of the lot.
7406K: Razor-Sharp Cutting Edge, Black Blade, Spectral Titanium Nitride
Liners
Length: 2.75” (70 mm)
Thickness: 0.12” (2.9 mm)
Steel: AUS 8, 58-59 HRC
Closed Handle length: 4.25” (108 mm)
Open Overall length: 7.0” (178 mm)
Weight: 4.4 oz. (125 g)
Full Throttle Assisted
$48.00
Outburst Assisted opening technology
Blade length: 2 7/8"
Open length: 6 7/8"
Steel: AUS 8 Stainless
$48.00
Outburst Assisted opening technology
Blade length: 2 7/8"
Open length: 6 7/8"
Steel: AUS 8 Stainless
Guppie Black Multi Tool
$32.00
They say, “The Guppie™ was born from the need for a small, pocketable
wrench-based tool that could tackle small- to medium-sized jobs. The name
comes from its fish-like form.” That Launce and Tom were able to pack all the
other Guppie features— knife, carry carabiner, screwdriver, bottle opener, bit
carrier, hex bits and LED light— into this small package is a tribute to their
sophisticated engineering ability. The Guppie’s adjustable wrench jaw opens
to 1/2", making it a handy tool for light assembly and repair, and a very
useful emergency tool in the home, office, or outdoors. The Guppie’s 2.0”
high-carbon stainless steel blade can be opened and closed with one hand.
The Guppie’s black stainless steel body features a carabiner shape, which
allows it to be carried on belt loops, D-rings, packs or rope. (It is not
intended as a weight-bearing climbing carabiner.) The carabiner detent is
ingeniously designed to open bottles and metal jar lids, a very useful feature
when camping. At the Guppie’s “tail” is a hex bit receiver which accepts
interchangeably the four hex bits included (two flat, two Phillips), making a
very functional high-torque screwdriver. The Guppie’s removable injection-
molded bit carrier uses two locating bosses and a powerful magnet to hold it
to the side of the Guppie securely. One end of the carrier features a tiny but
powerful LED flashlight, while the other end has a hole for a ring, allowing it
to be carried separately as a key chain fob, for example. The Guppie’s
removable stainless steel clip allows secure carry in pockets or on gear, and
also makes a handy money clip.
$32.00
They say, “The Guppie™ was born from the need for a small, pocketable
wrench-based tool that could tackle small- to medium-sized jobs. The name
comes from its fish-like form.” That Launce and Tom were able to pack all the
other Guppie features— knife, carry carabiner, screwdriver, bottle opener, bit
carrier, hex bits and LED light— into this small package is a tribute to their
sophisticated engineering ability. The Guppie’s adjustable wrench jaw opens
to 1/2", making it a handy tool for light assembly and repair, and a very
useful emergency tool in the home, office, or outdoors. The Guppie’s 2.0”
high-carbon stainless steel blade can be opened and closed with one hand.
The Guppie’s black stainless steel body features a carabiner shape, which
allows it to be carried on belt loops, D-rings, packs or rope. (It is not
intended as a weight-bearing climbing carabiner.) The carabiner detent is
ingeniously designed to open bottles and metal jar lids, a very useful feature
when camping. At the Guppie’s “tail” is a hex bit receiver which accepts
interchangeably the four hex bits included (two flat, two Phillips), making a
very functional high-torque screwdriver. The Guppie’s removable injection-
molded bit carrier uses two locating bosses and a powerful magnet to hold it
to the side of the Guppie securely. One end of the carrier features a tiny but
powerful LED flashlight, while the other end has a hole for a ring, allowing it
to be carried separately as a key chain fob, for example. The Guppie’s
removable stainless steel clip allows secure carry in pockets or on gear, and
also makes a handy money clip.
Guppie Multi Tool
$26.00
They say, “The Guppie™ was born from the need for a small, pocketable
wrench-based tool that could tackle small- to medium-sized jobs. The name
comes from its fish-like form.” That Launce and Tom were able to pack all the
other Guppie features— knife, carry carabiner, screwdriver, bottle opener, bit
carrier, hex bits and LED light— into this small package is a tribute to their
sophisticated engineering ability. The Guppie’s adjustable wrench jaw opens
to 1/2", making it a handy tool for light assembly and repair, and a very
useful emergency tool in the home, office, or outdoors. The Guppie’s 2.0”
high-carbon stainless steel blade can be opened and closed with one hand.
The Guppie’s bead-blast stainless steel body features a carabiner shape,
which allows it to be carried on belt loops, D-rings, packs or rope. (It is not
intended as a weight-bearing climbing carabiner.) The carabiner detent is
ingeniously designed to open bottles and metal jar lids, a very useful feature
when camping. At the Guppie’s “tail” is a hex bit receiver which accepts
interchangeably the four hex bits included (two flat, two Phillips), making a
very functional high-torque screwdriver. The Guppie’s removable injection-
molded bit carrier uses two locating bosses and a powerful magnet to hold it
to the side of the Guppie securely. One end of the carrier features a tiny but
powerful LED flashlight, while the other end has a hole for a ring, allowing it
to be carried separately as a key chain fob, for example. The Guppie’s
removable stainless steel clip allows secure carry in pockets or on gear, and
also makes a handy money clip.
$26.00
They say, “The Guppie™ was born from the need for a small, pocketable
wrench-based tool that could tackle small- to medium-sized jobs. The name
comes from its fish-like form.” That Launce and Tom were able to pack all the
other Guppie features— knife, carry carabiner, screwdriver, bottle opener, bit
carrier, hex bits and LED light— into this small package is a tribute to their
sophisticated engineering ability. The Guppie’s adjustable wrench jaw opens
to 1/2", making it a handy tool for light assembly and repair, and a very
useful emergency tool in the home, office, or outdoors. The Guppie’s 2.0”
high-carbon stainless steel blade can be opened and closed with one hand.
The Guppie’s bead-blast stainless steel body features a carabiner shape,
which allows it to be carried on belt loops, D-rings, packs or rope. (It is not
intended as a weight-bearing climbing carabiner.) The carabiner detent is
ingeniously designed to open bottles and metal jar lids, a very useful feature
when camping. At the Guppie’s “tail” is a hex bit receiver which accepts
interchangeably the four hex bits included (two flat, two Phillips), making a
very functional high-torque screwdriver. The Guppie’s removable injection-
molded bit carrier uses two locating bosses and a powerful magnet to hold it
to the side of the Guppie securely. One end of the carrier features a tiny but
powerful LED flashlight, while the other end has a hole for a ring, allowing it
to be carried separately as a key chain fob, for example. The Guppie’s
removable stainless steel clip allows secure carry in pockets or on gear, and
also makes a handy money clip.
C.R.K.T.